Installation Manual
|
|
|
|
|
|
|
| Models ECCB/TCCB 30” – 36” |
| ENGLISH |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CUTOUT |
| A | B |
| C | D | E | F |
| G | ||
| WIDTH |
|
|
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| 18” (45.7 cm) | 30” (76.2 cm) |
|
|
|
| ||
30” |
| (72.4 cm) | (49.0 cm) | 30” |
|
| min | min. | 2” (5 cm) min | 13” (33 cm) | |||
(76.2cm) |
| 29” |
|
| Height from | (see note*) | Clearance from | ||||||
| (76.2 cm) min | Depth of | |||||||||||
|
|
| (73.7 cm) | (49.8 cm) | Clearance from | ||||||||
|
|
|
|
|
| countertop to | cutout to side | ||||||
|
|
|
|
|
| nearest | countertop to | wall on the left | unprotected | ||||
|
|
|
|
|
| overhead | |||||||
36” |
| (86 cm) | (49.0 cm) | 36” |
|
| cabinet on | unprotected | and right of the | cabinets | |||
(91.4 cm) |
| (91.4 cm) min | either side of | overhead | unit |
|
|
| |||||
|
|
| (87.8 cm) | (49.8 cm) |
|
|
| unit | surface |
|
|
|
|
IMPORTANT |
|
|
|
| * NOTE |
|
|
|
|
|
| ||
Under the cooktop it is necessary to install a partition, |
| 24” (61 cm) min. clearance if bottom of wood or metal cabinets is | |||||||||||
spaced at least 15 mm. from the bottom of the |
|
| protected by not less than 1/4“ (0.6 cm) flame retardant millboard | ||||||||||
appliance as shown in figure 3. If an oven or another |
| covered with no less than No. 28 MSG sheet steel 0.015” (0.04 cm) | |||||||||||
appliance is built in under the cooktop, this partition |
| stainless steel, or 0.024” (0.06 cm) aluminum or 0.020” (0.05cm) copper. | |||||||||||
isn't necessary but in any case keep this clearance |
| 30”(76.2 cm) min. clearance between top of cooking platform and bottom | |||||||||||
|
|
|
|
|
|
| of unprotected wood or metal cabinet |
|
|
|
|
Important Preparation Suggestions
1.Chamfer all exposed edges of decorative laminate to prevent damage from chipping.
2.Radius corners of cutout and file to Insure smooth edges and prevent corner cracking. Recommend 1/4“or 3/8“diameter drill In each corner.
3.Rough edges, inside corners which have not been rounded and forced fits can contribute to cracking of the countertop laminate.
This cooktop has been designed with wide tolerances of
Some cut out sizes for possible replacements:
Dim. | Inches | cm | |
• | 30" | 29" x | 73,7 x 49,8 |
• | 36" | 87,8 x 49,8 |
7