Product Profile

This product is built to shred paper, staples, small paper clips and credit cards. It is not built to shred adhesive labels, trans- parencies, newspaper, cardboard, large paper clips, or plastic (other than credit cards). Attempting to shred items not intended for this shredder may cause damage.

 

Strip-Cut

Strip-cut

Confetti-cut

 

(120-2)

(120-2)

(120C-2)

Sheet capacity*

18-20 sheets

16-18 sheets

12-14 sheets

Paper shred size

5,8 mm

3,9 mm

3,9 x 25 mm

Maximum paper width

241 mm

241 mm

241 mm

Recommended daily capacity

4,000 sheets

4,000 sheets

2,000 sheets

*Based on A4 (70 g/m2) paper with shredder operating at rated voltage; heavier paper, high humidity, or other than rated voltage may reduce sheet capacity.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING

While setting up shredder

Check shredder for damage or defects; some paper particles in the basket are normal due to product testing and does not indicate a defect.

Avoid touching exposed blades on underside of confetti-cut shredder head.

Plug power cord in an outlet that can easily be reached. The plug is the primary electri- cal disconnect.

Make sure the electrical rating listed on the serial label (located inside, just below top of shredder) matches the available electric power.

Do not place shredder near or over a heat or water source.

While operating shredder

Keep hands and hanging objects (jewelry, ties, loose clothing, long hair, etc.) away from paper entry.

• Keep children and pets away from the shredder.

When not in use

Always turn off and unplug shredder.

Unplug before emptying basket.

Do not open shredder head: Danger of electric shock. Opening shredder head will void the warranty.

NOTE: Do not use flammable synthetic oil, petroleum-based products or aerosols of any kind on or near product at any time.

3

English

Page 4
Image 4
Fellowes manual Product Profile, While setting up shredder, While operating shredder, When not in use, 120-2 120C-2