| 120 |
Paper shredder | 120 CC |
|
|
8. Checklist for Inoperative Machine
If the equipment does not work properly, please
Door contact interrupted
– Paper shredder switches off automati-
check the following points first:
– Is the plug inserted ? |
– Is the switch turned on ? |
– Is waste container pushed in properly ? |
2
cally. Press rocker switch to center (2) position.
•Check whether cut material container is properly pushed into bottom frame.
– Is waste container full ? |
Empty container |
– Is there a paper jam in the shredder ? |
See Malfunctions |
– Is the motor overheated ? |
Switch machine off and allow motor to |
cool down for approximately |
If none of the above applies and the equipment still does not run, please contact the appropriate customer service department.
9. Malfunctions
1 | • Return switch to "on" position (1) and |
| |
| continue shredding. |
Cut material container full
–Paper shredder switches off automati- cally.
2 | • Press rocker switch to center (2) |
| position. |
•Empty cut material container or exchange cut material bag.
Paper jam
2
3
•Press rocker switch to center position
(2) to stop the cutting system.
•Press and hold down rocker switch in pos. (3) to reverse the cutting system and back out jammed material (paper is pushed out)
1 • Return switch to "on" position (1) and continue shredding.
10. Maintenance
(Cross cut unit only)
– When tearing capacity drops or the noise |
increases: |
| Caution! |
1 | Do not press rocker switch alternately |
3 | forwards/backwards in pos. (1 and 3) |
• Spray special cutting block oil onto |
cutting system. |
1 • Run cutting system forward (1) and
• Remove excess paper. |
1 • Return switch to pos. (1) and continue |
3
backward (3) several times without feeding paper.
shredding in smaller quantities so as |
not to jam the machine further. |
• Continue shredding.
Edition 11/00 | 1.598.999.100 | 7 |
USA
