120 |
|
120 CC | Paper shredder |
5. | Supplies |
– | Bags for cut material |
| (Packed in dispenser carton, 50 or 100 bags |
| to a roll depending on size. For bag informa- |
| tion, see label on inside of the waste container. |
| If label is missing, contact Fellowes or your |
| local Fellowes dealer for the stock number of |
| the bag that fits your machine.) |
– | Cutting block oil for |
| Stock # 35250. |
6. | Installation |
– | The paper shredder is supplied ready for |
| operation. |
– | Operate this product only from the type of |
| power source indicated on the marking label. |
– | Install the paper shredder so that the plug is |
| easily accessible. |
Switching equipment ON
1 – Press rocker switch to pos. (1)
•Controller switch locks in "on" position.
•Equipment is ready for operation (standby).
–Feed paper
•The shredding process is started by automatic start stop control in the paper feed opening. Insert paper and shredding begins automatically.
•When the shredding is complete, the cutting system automatically stops after approx. 3 seconds.
Switching equipment OFF
– Press rocker switch to pos. (3)
– | Shredder must be operated in upright position |
| only. |
– | Set up paper shredder so that the ventilation |
| slots are unobstructed. To ensure sufficient |
| ventilation of the shredder a minimum distance |
| of 4" (10 cm) to the wall or to the furniture must |
| be maintained. |
3
•switch resets to center position and stops the cutting system.
7. Operation
Read operating instructions before operating the shredder.
Insert plug in power outlet.
To avoid motor overload, the paper shredders may cut out automatically after approx. 20 minutes of continuous operation.
6 | 1.598.999.100 | Edition 11/00 |
USA
