PRODUCT MAINTENANCE
OILING SHREDDER 
All
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
12
ENGLISH
Model 99Ci
Cleaning Auto-Start Infrared Sensors
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run even if there is no paper present.
(Note: two paper detection sensors are located in the center of the paper entry).
TO CLEAN THE SENSORS |
|
|
|
1 | 2 | 3 | 4 |
*Apply oil across entry | Press and hold forward ( ) |
|
*Only use a
TROUBLESHOOTING
Turn off and unplug | Locate | Dip cotton swab in | Using cotton swab, wipe |
shredder | infared sensor | rubbing alcohol | away any contamination |
|
|
| from the paper sensors |
A. Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This indicator will remain illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about the continuous operation and recovery time for this shredder.
|
|
|
|
| B. Bin Open: The shredder will not run if the bin is open. |
A | B | C | D | E | When illuminated, close the bin to resume shredding. |
C. Bin Full: When illuminated, the shredder waste bin is full and needs to be emptied.
Use Fellowes waste bag 36053.
D.Remove Paper: When illuminated, press reverse (
) and remove paper. Reduce paper quantity to an acceptable amount and refeed into paper entry.
E.SafeSense® Indicator: If hands are too close to the paper entry, the SafeSense® indicator will illuminate and the shredder will stop shredding. If SafeSense® is active for 3 seconds, the shredder will automatically turn off and the user must press the power button on the control panel to resume shredding.
JAM PROOF SYSTEM*
Eliminates paper jams and powers through tough jobs
DISABLING THE FEATURE
1 | 2 | 3 | 3 | 3 | 6 |
54 | 5 |
AUTO
Should you choose to disable the system, press and hold the auto button (blue) and reverse (
) key at the same time
Once disabled, the blue | Shredding can continue with the |
| If jam occurs, press and hold | If not cleared, press reverse | If steps 4 and 5 do not clear | |
Auto light is no longer | system disabled, however a paper | forward ( ) key until the | ( | ) briefly (repeat steps | jam, reverse paper all the way | |
illuminated (To | jam may occur with too many sheets | document is completely through | 4 and 5 until shredded) | out, remove several sheets | ||
repeat step 1) | and Remove Paper icon ( | ) | the shredder |
|
| and refeed |
| will illuminate |
|
|
|
|
|
* 100% Jam Proof when used in accordance with user manual
