A.
B.
C.
D.
E.
F.
G.
H.
KEY
| A. SafeSense® Technology | I. Control Panel and LEDs | ||||
I. | B. CD/card entry |
| 1. | Overheat (red) | ||
| ||||||
C. See safety instructions | 2. | SafeSense® indicator (yellow) | ||||
| ||||||
| D. Paper entry | 3. | ON/OFF (blue) | |||
| E. | 4. | Reverse | |||
| F. Window | 5. | Forward | |||
| G. Casters |
|
|
| ||
| H. ON/OFF switch |
|
|
| ||
|
| 1. OFF |
|
|
| |
|
| 2. ON |
|
|
| |
|
|
|
|
| ||
|
|
|
|
| ||
ENGLISH
Model 460Ms
CAPABILITIES
Will shred: Paper, credit cards, CD/DVDs and staples
Will not shred: Adhesive labels, continous form paper, transparencies, newspaper, cardboard, laminates, paper clips, file folders,
Paper shred size: |
|
5/64 in. x 5/16 in. (2mm x 8mm) | |
Card/CD shred size: |
|
5/16 in. (8mm) |
Maximum: |
|
Sheets per pass | 10* |
Cards/CDs per pass | 1* |
Paper entry width | |
Cards/CDs width |
*8.5 in. x11 in., 20lb., (75g) paper at 120V, 60 Hz, 5.8Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Maximum recommended daily usage rates:
400 sheets per day; 25 credit cards; 10 CDs. 
10 sheets per pass to avoid jams.
Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
•Operation, maintenance, and service requirements are covered in the instruction manual. Read the entire instruction manual before operating shredders.
•Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use.
•Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder openings. If object enters top opening, switch to Reverse (
) to back out object.
•Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder.
•Do not use if damaged or defective. Do not disassemble shredder.
Do not place near or over heat source or water.
•This shredder has an ON/OFF Switch (H) that must be in the ON ( ) position to operate shredder. In case of emergency, move switch to OFF (O) position. This action will stop shredder immediately.
•Avoid touching exposed cutting blades under shredder head.
•Shredder must be plugged into a properly grounded wall outlet or socket of the voltage and amperage designated on the label. The grounded outlet or socket must be installed near the equipment and easily accessible. Energy converters, transformers, or extension cords should not be used with this product.
•FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
•For indoor use only.
•Unplug shredder before cleaning or servicing.
