BEFORE YOU BIND
1 |
Select the correct comb diameter using the document measure.
5
Insert the plastic comb into the opening mechanism. Pull comb- opening lever forward to open the comb.
2 | 3 | 4 |
Select the correct punch |
| To cancel a punch, pull the pin | Select the correct back margin | ||||
profile for the sheet size. |
| forward. Test punch a sheet. | depth for the number of sheets. | ||||
Select releasable dies as |
|
|
|
|
|
|
|
appropriate. |
|
|
|
|
|
|
|
6 | 7 | 8 |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press the foot pedal to test | Load punched sheets directly | Empty waste tray regularly - |
punch scrap sheets to check | onto the open comb. | ideally after each use. |
edge guide setting. |
|
|
BINDING A DOCUMENT
12
Front
Cover
Back
Cover
34
MAX 30
(20lb / 80gsm)
Press the foot pedal to punch front and back covers first.
Press the foot pedal to punch sheets in small batches that do not overload the machine or the user.
Load punched sheets directly onto the opened comb. Starting with the front of the document.
When all punched sheets are loaded onto the comb, push the comb lever backwards to close the comb and remove the bound document.
CORRECTING A BOUND DOCUMENT
Additional sheets may be added or removed at any time by opening and then closing the comb as previously described.
4
