REMOVAL OF WASTE CLIPPINGS

The tray should be emptied after every 50 operations to ensure no blockages occur.

TROUBLESHOOTING

This machine is fitted with a fuse, located between the main switch and main socket on the rear of the machine. To replace the fuse;

• Isolate the machine from the main supply.

• Open the fuse holder with a screwdriver blade.

The holder contains two fuses, the loose fuse is a spare.

• Insert a new fuse in the holder and replace the holder in to the machine.

NOTE: Always use the recommended fuse (120W / 2A) and DO NOT replace it with one of a different rating.

Problem

Cause

Solution

 

 

 

No power

Machine is not switched on

Switch on machine at rear next to plug inlet and at the

 

 

socket

 

 

 

Not punching

Thermal cut-out switch has activated

Allow machine to cool down for 30-60 minutes.

 

 

 

Punched holes are not central

Edge guide not set

Adjust edge guide until hole pattern is correct

 

 

 

Machine will not punch

Blockage

Check waste tray is empty. Check for blockage to paper

 

 

entry

 

 

 

Punch holes are not parallel to

Debris is stuck below dies

Take stiff cardboard and slide into the paper entry. Move

edge

 

the cardboard sideways to release any stray clippings into

 

 

the waste tray

 

 

 

Partial holes

Sheets not correctly aligned to punch

Adjust edge guide and test punch scrap sheets until correct

 

pattern

 

 

 

 

Missing holes

Selectable dies are not selected to punch

Check the current dies are selected to punch holes. To

 

 

select a die, push selector switch down at the front

 

 

 

Damaged hole edges

Possibly overloading the machine

Punch plastic covers with paper sheets. Reduce number of

sheets being punched

 

 

 

 

 

WORLDWIDE WARRANTY

Fellowes warrants all parts of the binder to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during warranty period, your sale and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. Any implied warranty, including that of merchantability or fitness for particular purpose, is hereby limited in duration

to the appropriate warranty period set forth above. In no event shall Fellowes be liable for any consequential damages attributable to this product. This war- ranty gives you specific legal rights. You may have other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty, please contact Fellowes or your dealer.

5

Page 5
Image 5
Fellowes 500 manual Removal of Waste Clippings, Troubleshooting, Worldwide Warranty, Problem Cause Solution