Fellowes 63cb manual Capabilities, IMPORTANT SAFETY INSTRUCTIONS - Read Before Using, English

A.

B.

C.

D.

CAPABILITIES

E.

F.

G.

ENGLISH

Model 63Cb

KEY

A. SafeSense® Technology	E. Disconnect power switch			G. Control Switch and Indicator lights
B. Paper entry	1.		OFF	1.			Reverse
C. Pull-out Bin		2.	ON	2.			OFF
D. Window	F. See safety instructions			3.			Auto On (blue)
				4.			SafeSense® indicator (yellow)
					5.		Overheat (red)
				6.			Door open (red)
						7.	Remove Paper (red)

Will shred: Paper, credit cards, staples and small paper clips

Will not shred: Adhesive labels, CD/DVDs, continuous form paper, transparencies, newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted above

Paper shred size:
Cross-Cut	5/32 in. x 2 in. (4mm x 50mm)

Maximum:
Sheets per pass	10*
Cards per pass	1*
Paper entry width	9 in. (230mm)

*8.5 in. x 11 in., 20lb., (75g) paper at 120V/60 Hz, 2.5Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Recommended daily usage rates:

200 sheets; 5 credit cards. 10 sheets per pass.

Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

•Operation, maintenance, and service requirements are covered in the instruction manual. Read the entire instruction manual before operating shredders.

•Keep away from children and pets. Keep hands away from paper entry.

Always set to off or unplug when not in use.

•Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder openings. If object enters top opening, switch to Reverse (R) to back out object.

•Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air

on shredder.

•Do not use if damaged or defective. Do not disassemble shredder. Do not place near or over heat source or water.

•This shredder has a Disconnect Power Switch (E) that must be in the ON (I) position to operate shredder. In case of emergency, move switch to OFF (O) position. This action will stop shredder immediately.

•Avoid touching exposed cutting blades under shredder head.

•Shredder must be plugged into a properly grounded wall outlet or socket of the voltage and amperage designated on the label. The grounded outlet or socket must be installed near the equipment and easily accessible. Energy converters, transformers, or extension cords should not be used with this product.

•FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.

•For indoor use only.

•Unplug shredder before cleaning or servicing.

BASIC SHREDDING OPERATION

Continuous operation: up to 8 minutes maximum

NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 8 minutes will trigger 20-minute cool down period.

PAPER/CARD

1 2 3 4

Plug in and put	Press Auto On (	)	Feed paper/card	When finished
disconnect power	to activate		straight into paper	shredding set to
switch in ON (I) position			entry and release	OFF ( )

www.fellowes.com features an extensive on-line support section with a number of self-service options