Fellowes CC4-2 manual Important Safeguards, Parts Of The Shredder, Assembly, Power Cord Care

IMPORTANT SAFEGUARDS

¥NEVER insert hands or fingers into paper entry as serious personal injury may result.

¥THIS MACHINE IS NOT A TOY. Keep children and pets away from shredder AT ALL TIMES as serious injury may result. Always unplug shredder when not in use.

¥Keep loose objects (jewelry, ties, long hair) away from shredder. These items and others like them may cause serious injury if they accidentally fall into the paper entry.

¥Confetti cut shredders contain sharp edges on the underside of the machine. Use caution when posi- tioning the shredder head onto the basket.

¥Do not exceed recommended sheet capacity.

¥Do not shred plastic, continuous forms, adhesive labels, transparencies, glossy paper, newsprint, or cardboard.

¥This personal shredder is intended for paper only. Do not attempt to shred paper clips or other hard materials (except staples).

¥Do not place shredder near or over a heat source or water.

¥Always turn off and unplug unit before moving or cleaning and when not in use.

¥Do not insert aerosol cleaners into or around the shredder. Some agents may combust, causing seri- ous injury.

¥Never use flammable synthetic oil, petroleum- based or aerosol lubricants to oil the cutting blades. Some agents may combust, causing serious injury. Use only a recommended oil in a non-aerosol con- tainer. See "MAINTENANCE."

¥Do not use this product if it or the cord has been damaged in any way.

¥Do not open the cover for any reason. Doing so can expose you to dangerous voltages and will void your warranty.

Power Cord Care

¥Place power cord in an easily accessible position, because it is the main disconnect switch.

¥Do not place machine where adults, children or ani- mals may walk on the cord.

¥Do not rest anything on the power cord.

¥If an extension cord is used, be sure that all prod- ucts plugged into the extension cord do not exceed the extension cord ampere rating.

PARTS OF THE SHREDDER

A	D
	E
	C
B
	F
A. Paper entry	E. Power switch
B. Basket	F. Shredder head
C. Red LED
D. Auto-start sensor
ASSEMBLY

NOTE: This shredder will operate only when used with the supplied basket. The supplied basket has a built-in safety feature which prevents the shredder from oper- ating if used with any other basket or if improperly assembled.

To assemble shredder:

This shredder contains sharp edges on the underside of the shredder

head. Use caution when positioning the shredder head onto the basket.

1.Position shredder head over basket as shown in Figure 1.

2.Align slot on back of shredder head with the tab on the inside rear of the basket.

3.Lower shredder head onto basket (while maintain- ing tab/slot alignment).

Figure 1