Maintenance

Regular emptying of the basket is important to ensure the smooth operation of the cutting cylinders. If you can see paper in the basket window (7), turn off the shredder, pull out the basket and empty basket contents.

Regular oiling of the shredder is also necessary to ensure proper performance. If you are running the shredder at or near capacity, we recommend oiling it monthly. Using Fellowes Powershred Lubricant #35250 or other non-aerosol vegetable-based oil in a long-nozzle container:

• Apply oil over full width of paper entry (1) with shredder in off [O] position.

• Press control switch to automatic [I] position which will cause shredder to run for about 2 seconds.

Press and hold control switch in reverse [R] position for 3-5 seconds.

Repeat above automatic [I] and reverse [R] sequence three times.

REMINDER: Do not use flammable synthetic oil, petroleum-based products or aerosol lubricants of any kind in or near the shredder at any time.

Troubleshooting

If you have a problem with your shredder, check the symptoms and remedies below. If you cannot solve the problem this way, contact Fellowes Customer Service. Do not open shredder head to attempt repair: It could expose you to serious electric shock and will void your warranty.

 

Symptom

Remedy

 

 

Shredder does not start or stops while

Make sure shredder is plugged in and

 

 

shredding.

 

switch is in automatic [I] position.

 

 

 

If paper appears to be jammed. Follow

 

 

 

 

instructions under Operation.

 

 

 

Check basket position; basket must be

 

 

 

 

pushed all the way in the cabinet.

 

 

 

 

Follow instructions under Set-Up.

 

 

 

 

 

 

 

Overheat light (9) turns on and shredder

Wait 30 minutes for shredder to cool

 

 

will not operate.

 

down before trying again.

 

 

 

 

 

 

 

Red display light (10) turns on and shred-

If paper appears to be jammed. Follow

 

 

der will not operate.

 

instructions under Operation.

 

 

 

Check basket position; basket must

 

 

 

 

be pushed all the way in the cabinet.

 

 

 

 

Follow instructions under Set-Up.

 

 

 

 

 

 

 

Shredder squeaks, grinds or runs below

Oil cutting cylinders. Follow instructions

 

 

capacity.

 

under Maintenance.

 

 

 

 

 

 

 

Shredder continues to run for a few sec-

No action required. This is a self-clean-

 

 

onds after shredding has been completed.

 

ing function.

 

ENGLISH

5

Page 6
Image 6
Fellowes DM8C manual Troubleshooting, Symptom Remedy, Under Maintenance