Fellowes DS-12Ci manual Q. R

A.

12

B.

C.

AUTO

ENGLISHENGLISH

G.				Model DS-12Ci
	KEY
	A. SafeSense® Technology	F. Casters	K. Bin open (red)	P. Auto correcting button (blue)
	B. Paper entry	G. Disconnect power switch	L. Bin full (red)	Q. Reverse
	C. See safety instructions	H. Power conrols	M. Remove Paper (red)	R. On/off (blue)
	D. CD/Card flap	I. SafeSense® override switch	N. SafeSense® indicator (yellow)	S. Forward
	E. Pullout bin	J. Overheat (red)	O. Sheet capacity indicator

D.

E.

CAPABILITIES

H.	Will shred:	Paper, credit cards, CD/DVD’s, staples and small paper clips
	Will not shred: Adhesive labels, continous form paper, transparencies, newspaper,
	cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted
	above
	Paper shred size:
	Cross-Cut	5/32” x 1-1/2” (3.9 x 38mm)

Maximum:
Sheets per pass	12*
CDs/Cards per pass	1*
Paper entry width	9”/230mm

*8.5”x11”, 20lb., (75g) paper at 120V, 60 Hz, 4Amps; heavier paper, humidity

or other than rated voltage may reduce capacity. Recommended daily usage rates:

25–50 shredding passes per day, 25 credit cards; 10 CDs. 12 sheets per pass.

Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.

F.

ADVANCED PRODUCT FEATURES

			Jam Proof System
			Eliminates frustrating jams by
			preventing overloads and powering
			through misfed paper.
	TECHNICAL EXPLANATION
		Sheet capacity indicator tells you
		when you have too many sheets or
		too few to maximize productivity
		Shredder will not operate when too many
		sheets are fed into paper entry (red
		light). Reduce sheet quantity and refeed
O.		If misfed, shredder will automatically
		adjust to power through or reverse
		out paper

Patented SafeSense® Technology Stops shredder immediately when hands are too close to the paper entry.

TECHNICAL EXPLANATION

Shredder will stop automatically and indicator will light up when hands are too close to the paper entry

Shredder will resume normal operation when hands are no longer near the paper entry

Flashing indicator warns when SafeSense® technology has been shut off

SilentShred™ Technology SilentShred™ noise quality shreds without noisy disruptions

TECHNICAL EXPLANATION

SilentShred™ motor features whisper-quiet, efficient shredding performance without the noisy disruptions

								P.		IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
									• Keep away from children and pets. Keep hands away from paper		• This shredder has a Disconnect Power Switch (G) that must be in the ON (I)
							AUTO		entry. Always set to off or unplug when not in use.		position to operate shredder. In case of emergency, move switch to OFF (O)
									• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away		position. This action will stop shredder immediately.
I.
									from shredder openings. If object enters top opening, switch to		• Avoid touching exposed cutting blades under shredder head.
									Reverse ( ) to back out object.		• Rotate CD flap entry for shredding CDs/cards. Keep finger away from
									• Never use aerosol products, petroleum based lubricants or other flammable		CD hole. Jam Proof System is disabled when flap is in CD position.
									products on or near shredder. Do not use canned air on shredder.		• Do not put foreign objects in paper entry.
									• Do not use if damaged or defective. Do not disassemble shredder. Do		• The grounded socket-outlet shall be installed near the equipment and shall be
									not place near or over heat source or water.
											easily accessible.
	J.	K.	L.	M.	N.			S.
						Q. R.

2