A.
B.
C.
D.
E.
F.
INDICATOR LIGHTS
G.
H.
ENGLISH
Model HS-440
KEY
A. Safety Flap | H. Control Panel and LEDs | |
B. Paper entry | 1. | ON/OFF |
C. Disconnect switch (open door) | R 2. Reverse | |
D. Door | 3. | Bin full |
E. Wire Frame - paper (inside) | 4. | Door open |
F. Casters | 5. | Safety Flap Open |
G. See safety instructions |
|
|
Stops automatically | Stops automatically | Stops automatically | Stops automatically | Overload protection. |
when door is | when bin is full. | if too much | if safety flap is | Machine stops to cool |
opened. Symbols | Empty bag when | paper is inserted. | opened. Symbols | down- approx. |
flash alternately | bag full indicator | Automatic reverse | flash alternately | minutes. Symbols |
| lights up | if paper jams |
| flash alternately |
CAPABILITIES
Will shred: Paper only
Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper, junk mail, credit cards, CD/DVDs, staples, paper clips, cardboard, laminates, file folders,
Paper shred size:
High Security
ADVANCED PRODUCT FEATURES
Sleep Mode
Energy saving feature shuts down the shredder after 1 hour of inactivity
Maximum: |
|
Sheets per pass | 4* |
Paper entry width |
*8.5 in. x 11 in., 20lb., (75g) paper at 120V, 60 Hz, 3.2Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Recommended maximum daily usage rates: 1,000 sheets per day.
4 sheets per pass.
*In order to perform at capacity, shredder must be plugged into a dedicated 15Amp, 120V outlet and oiled every
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
•Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use.
•Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder openings. If object enters top opening, switch to Reverse (R) to back out object.
•Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder.
•Do not use if damaged or defective. Do not disassemble shredder. Do not place near or over heat source or water.
•This shredder has a Disconnect Power Switch (C) in the door. The door must be closed to operate shredder. In case of emergency, open door. This action will stop shredder immediately.
•Avoid touching exposed cutting blades under shredder head.
•Shredder must be plugged into a properly grounded wall outlet or socket of the voltage and amperage designated on the label. The grounded outlet or socket must be installed near the equipment and easily accessible. Energy converters, transformers, or extension cords should not be used with this product.
•Do not operate the machine without the safety flap closed (A).
1
