Fellowes SB-89Ci Capabilities, Advanced Product Features, Paper shred size, Maximum, Technology

A.		ENGLISHENGLISH
	G.	Model SB-89Ci

15

B.

C.

AUTO

KEY

A. SafeSense® Technology	F. Casters	K. Overheat (red)	P. Sheet capacity indicator
B. Paper entry	G. Disconnect power switch	L. Bin open (red)	Q. Auto correcting button (blue)
C. See safety instructions	H. Paper tray	M. Bin full (red)	R. Reverse
D. CD/Card flap	I. SafeSense® override switch	N. Paper jam (red)	S. On/off (blue)
E. Pullout bin	J. Power controls	O. SafeSense® indicator (yellow)	T. Forward

D.

J.

E.

CAPABILITIES

Will shred: Paper, credit cards, CD/DVD’s, staples and small paper clips

Will not shred: Adhesive labels, continous form paper, transparencies, newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted above

Paper shred size:
Cross-Cut	5/32” x 1-1/2” (3.9 x 38mm)

ADVANCED PRODUCT FEATURES

Maximum:
Sheets per pass	15*
CDs/Cards per pass	1*
Paper width	9”/230mm

*8.5”x11”, 20lb., (75g) paper at 120V, 60 Hz, 5Amps; heavier paper, humidity

or other than rated voltage may reduce capacity. Recommended daily usage rates:

50–100 shredding passes per day, 50 credit cards; 10 CDs. 15 sheets per pass.

Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.

F.

P.

Jam Proof System Eliminates frustrating jams by preventing overloads and powering through misfed paper.

TECHNICAL EXPLANATION

Sheet capacity indicator tells you when you have too many sheets or too few to maximize productivity

Shredder will not operate when too many sheets are fed into paper entry (red light). Reduce sheet quantity and refeed

If misfed, shredder will automatically adjust to power through or reverse out paper

® Technology

Stops shredder immediately when hands are too close to the opening.

TECHNICAL EXPLANATION

Shredder will stop automatically and indicator will light up when hands are too close to the opening

Shredder will resume normal operation when hands are no longer near the opening

Flashing indicator warns when SafeSense® technology has been shut off

SilentShred™ Technology SilentShred™ noise quality shreds without noisy disruptions

TECHNICAL EXPLANATION

SilentShred™ motor features whisper-quiet, efficient shredding performance without the noisy disruptions.

	15			Q.		IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
					• Keep away from children and pets. Keep hands away from paper		• This shredder has a Power Disconnect Switch (G) that must be in the ON (I)
			AUTO		entry. Always set to off or unplug when not in use.		position to operate shredder. In case of emergency, move switch to OFF (O)
I.		H.			• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away		position. This action will stop shredder immediately.
					from shredder openings. If object enters top opening, switch to		• Avoid touching exposed cutting blades under shredder head.
					Reverse (R) to back out object.		• Rotate CD flap entry for shredding CDs/cards. Keep finger away from
					• Never use aerosol products, petroleum based lubricants or other flammable		CD hole.
					products on or near shredder. Do not use canned air on shredder.		• Do not put foreign objects in paper entry.
					• Do not use if damaged or defective. Do not disassemble shredder. Do		• The grounded socket-outlet shall be installed near the equipment and shall be
					not place near or over heat source or water.
							easily accessible.

K. L. M. N. O. R. S. T.