ENGLISH
Set-Up
•Pull waste basket drawer (A) completely out of cabinet.
•Put waste bag in basket (sample bags provided). Allow edges to overhang. Contact Fellowes to order more bags. (Part #36053).
•Slide waste basket drawer (A) into cabinet. The shredder will not operate if drawer is not pushed all the way into cabinet.
•Casters have been added for your convenience.
•Plug power cord into a convenient outlet.
Operation
Control Switches
E
H
F
Control Switch (E)
IAUTOMATIC Turns on the auto-
O OFF | R REVERSE |
Turns off the auto- | Runs shredder in |
reverse mode. | |
and the green | Press and hold to |
Ready light. | activate. |
I | J |
|
|
|
|
|
| Troubleshooting Lights |
|
|
|
| |
Ready Light (F) | Basket Ajar (H) | Paper Jam (I) |
|
|
| Overheat Light |
|
| |||||
(Green) | Waste basket | Shredder is |
|
|
| (J) |
Shredder is in | drawer is open. | jammed (e.g., |
|
|
| Shredder |
automatic start | Basket Full (H) | too much paper |
|
|
| requires a cool |
mode. | fed at one |
|
|
| down period. | |
Waste basket is |
|
|
| |||
full or paper has | time). |
| |
collected under |
|
cutting cylinders. |
|
For convenience and energy savings, your shredder is equipped with an automatic- start sensor (K). This means that when the control switch (E) is in the automatic [I] position, the shredder will start running when paper is fed into it. The shredder stops a few seconds after the paper has passed through.
CAUTION: The
To shred
Press control switch (E) to automatic [I] position. Green ready light (F) should turn on.
PAPER
•Feed paper straight into entry (C), releasing when shredder begins shredding; see Product Profile for limits on paper width, shreddable items, sheet capacity, etc.
•Shred no more than 20 minutes; shredding longer will cause shredder to turn itself off for 30 minutes to cool down.
•Press control switch to off [O] position after cutting has stopped.
4
