ENGLISH

Troubleshooting

If there is a problem with your shredder, check these symptoms and remedies. If you cannot solve the problem, contact Fellowes customer service. Do not open shredder head to attempt repair. You could be exposed to serious electric shock and will void the warranty.

Symptom

Remedy

Ready Light (F) will not light.

Make sure shredder is plugged in and

 

 

 

 

 

the control switch (E) is in the automatic

 

 

 

 

 

[I] position.

Shredder does not start or stops

• Make sure shredder is plugged in and

while shredding.

control switch (E) is in the automatic [I]

 

 

 

 

 

position.

 

 

 

 

 

• Shredder is jammed. Follow the

 

 

 

 

 

instructions under Operation.

 

 

 

 

 

 

Basket ajar/basket full

Make sure the waste basket (A) is all the

light (H) is on.

way into the cabinet. Empty the waste

 

 

 

 

 

basket. Follow the instructions under

 

 

 

 

 

Operation.

Paper jam light (I) is on.

Clear the paper jam. Follow the

 

 

 

 

 

instructions under Operation.

Overheat light (J) turns on and

 

 

 

 

Wait 30 minutes for shredder to cool

 

 

shredder will not operate.

 

 

 

 

down before trying again.

Shredder sheet capacity decreases,

Oil the cutting cylinders. Follow the

noise level increases, or cutting cylinders

instructions under Maintenance.

stop with a squeak or rubbing sound.

 

 

 

 

 

 

 

Shredder runs for a few seconds after the

No action required. This is a self-cleaning

paper has cleared the cutters.

function.

6

Page 7
Image 7
Fellowes SB-95C manual Troubleshooting, Symptom Remedy, Operation