Fender 40 Footswitch, USB Port, Factory Restore & Firmware Update, To program the footswitch

BRONCO™ 40

Footswitch

Connect a (optional) 1-button footswitch (P/N 0994049000) into the FTSW jack to enable remote selection of your two favorite presets. The LED (next to the FTSW jack) will turn red or green to indicate which footswitch preset is active.

To program the footswitch:

1.Select a preset that you want to assign to the footswitch. The preset must not be modified (the SAVE button must NOT be illuminated to proceed to step 2).

2.Press the SAVE button. The SAVE and EXIT buttons should be flashing rapidly. You can press EXIT at this point to cancel the footswitch assignment process.

3.Press the footswitch button to select either the red or green LED next to the FTSW jack to associate with the chosen preset.

4.Press the SAVE button to confirm the footswitch assignment. Now when you press the footswitch, the chosen preset will be activated with the assigned red or green footswitch indicator.

USB Port

Use the USB port to connect the Bronco™ 40 amplifier
to your computer and take your music to the next
level in stereo:	USB

•Use Fender® FUSE™ software to control your Bronco 40 from your computer and access bonus amp features not available from the Bronco 40 alone.

♫Please see the Fender FUSE manual at www.fender. com/support for details.

•Record and edit Bronco 40 audio in stereo using Ableton® Live Lite 8 Fender® Edition software.

♫Please see the Ableton® Live Lite 8 Fender edition at www.fender.com/support for details.

•Stream live audio and play with people around the world using Fender® BAND JAM, powered by eJamming® AUDiiO.

♫For a 30-day trial subscription, log on to: www.fender. com/ejamming

Factory Restore & Firmware Update

Factory Restore

You can restore your Bronco 40 amplifier to the original factory settings if desired. All user presets will be erased!

To restore the Bronco 40 amplifier to factory settings:

1.Turn the amplifier OFF.

2.Press and hold the EXIT button while turning the amplifier ON. Continue holding the EXIT button until it is no longer illuminated.

!The FACTORY RESTORE function will erase all user modified presets. It will also restore the AMBER bank of presets and any effect selections that have been modified using Fender FUSE software.

Firmware Update

From time to time, Fender may make available firmware updates for your Bronco 40 amplifier to improve operation or to add new features. To update the firmware on your amplifier you will need to connect it through the USB port to a computer with Fender FUSE software and an internet connection.

♫Please see the Fender FUSE manual at www.fender. com/support for details.

FAQ

There are several great places you can go to learn more about the Bronco 40 and music in general:

•www.fender.com/support

•Join a Fender Community forum where you can ask questions and read threads. There's even a forum just for the Bronco 40: www.fender.com/community/forums

•Log on to the Fender Knowledge Base to download and read "Frequently Asked Questions" (FAQ): www.fender. com/support/faqs.php

•Find music theory learning materials and sheet music at Hal Leonard Publications: www.halleonard.com

f e n d e r . c o m 5