Fender BXR 300C, BXR 300R owner manual Specifications

SPECIFICATIONS

POWER AMPLIFIER SECTION:

Power output		300 Watts
Rated load impedance		4 Ohms
Distortion at rated power		Less than .05%
Damping factor, at 4 Ohms		Greater than 100
Power bandwidth		20 Hz - 20 kHz
Input sensitivity		1.33 volt R.M.S.
Input impedance		>10k Ohms
Slew factor		Greater than 1
Signal to noise ratio		-100 dB Re/300 Watts
DELTACOMP™ range			20 dB
	PREAMP :
Input impedance:		Input 1	> 100k Ohms
		Input 2	> 800k Ohms
Sensitivity:	Volume at max., enhance	Input 1	< 10mV
	buttons out, all equalization	Input 2	< 20mV
	controls at 12 o'clock, power
	amp at 300 Watts, 4 ohms

Equalization range:
Enhance:	Low +9dB at 80 Hz.
	High +12dB at 5kHz.
Bass:	+/- 14dB at 40 Hz.
Treble:	+/- 17dB at 5kHz.
Mid:	+/- 20 dB at 150 Hz through 4kHz.

Overall signal to noise ratio, volume at min.,	-95 dB below
	rated output
PHYSICAL SPECIFICATIONS:
BXR 300R
Width (rack ears installed)	19 inches
Width (without rack ears)	17 inches
Height	3.5 inches
Depth	10.125 inches
Weight	19 lbs.
BXR 300C
Width	21-7/8 inches
Height	29-11/16 inches
Depth	15-5/8 inches
Weight	78 lbs.
Speaker	1 -15" Fender Special
	Design (part number 027577)

A product of:

FENDER MUSICAL INSTRUMENTS 1130 Columbia Street, Brea, California