ZMT Owner’s Manual
6.3Working Mode
6.3.1Adjust the machine to suit the type of work to be done and the material to be cut:
• Adjust the height of cut, as shown in Figure 13.
Working speed is chosen to suite the material to be cut and the degree of chopping required.
The optimum speed ranges from 2 to 5 miles per hour.
IMPORTANT: When extending and closing the arms, lightly lift the flail head off the ground, to avoid damage to the frame (Figure 16)
Figure 16
IMPORTANT: During reverse movement, lift the shredder off the ground to avoid damaging the machine (Figure 17 & 18)
Figure 18
Figure 17
6.4Stopping
Before stopping the tractor:
•Close the arms and lower the flail head to the ground.
•Disconnect the power takeoff.
•Stop the tractor, take out the ignition key and apply the hand brake.
•If the ground is sloping, block the tractor wheels.
15
