f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g)Use the power tool, accessories and tool bits etc., in accordance with these instruc- tions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5)Service
a)Have your power tool serviced by a quali- fied repair person using only identical re- placement parts. This will ensure that the safety of the power tool is maintained.
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND IN- STRUCTION MANUAL.
Various dust created by power sand- ing, sawing, grinding, drilling and other construc- tion activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•Lead from
•Crystalline silica from bricks and cement and other masonry products,
•Arsenic and chromium from
The risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals work in a well ventilated area and use approved safety equip- ment, such as dust masks that are specially designed to filter out micro- scopic particles.
Technical data | DTS 400 Q / DTS 400 EQ | |||||
Wattage | 230 W |
|
| |||
No load speed | 15 000 rpm / 6 000 - 15 000 rpm | |||||
No. of strokes | 30 000 spm / 12 000 - 30 000 spm | |||||
Sanding stroke | 2.0 mm (0.079 in.) | |||||
Sanding base (delta form) | 80 x 150 mm (3.1 x 5.9 in.) | |||||
Weight |
| 1.3 kg (2.9 lbs.) | ||||
Safety llevel | / II |
|
| |||
|
|
|
| sons. The machines may only be used for dry | ||
| Symbols |
|
| |||
|
|
|
| sanding. | ||
V | volts |
|
| |||
|
|
| The user bears sole responsibility for | |||
A | amperes |
|
|
| ||
|
| any | ||||
Hz | hertz |
|
| |||
|
| rect use. | ||||
W | watt |
|
| |||
|
|
|
| |||
~ | alternating current |
|
|
|
| |
|
| Electrical connection | ||||
n0 | no load speed |
|
| |||
|
|
| and operation | |||
| Class II Construction |
|
|
| ||
rpm | revolutions per minute |
|
| The mains voltage must correspond with the volt- | ||
spm | strokes per minute |
|
| age on the rating plate! | ||
|
|
|
| See the following Fig. for connecting or dis- | ||
| Intended use |
|
| |||
|
|
|
| connecting the power cord of the tool. | ||
The sanders are designed for sanding wood, plas- | ||||||
| Always switch the machine off before | |||||
| ||||||
tic, composite materials, paint / varnish, filling |
| |||||
connecting or disconnecting the power cable! | ||||||
material and similar materials. Metal and materials | ||||||
|
| |||||
with an asbestos content must not be processed |
|
| ||||
with these tools. |
|
|
|
| ||
The machine is particularly suitable for processing smaller surfaces and overhead work because of its size, its weight and its output.
The machines must not be damp nor operated in a damp environment for electrical safety rea-
3
