NOTE: The performance of the ClearWave™is not affected by the direction or orientation of the unit. The unit may be mounted to horizontal, vertical, or diagonally. The ClearWave™ can be used effectively on any type of water pipe; galvanized, copper, or plastic.
NOTE: The ClearWave™ is designed and tested to cause little or no interference to other communication devices, such as televisions, and most cordless telephones. Install the ClearWave™ at least ten feet from any radio, television, or cordless telephone base unit to eliminate possible interference.
MAXIMUM WATER CONDITIONING CAPACITY FOR NOMINAL PIPE DIAMETERS
Nominal Pipe Diameter | 3 inch | 4 inch | 6 inch | 8 inch |
| ||||
# of Units Req. | 1 | 1 | 1 | 2 |
GPM Flow | 220 | 390 | 877 | 1630 |
OPERATION TIMETABLE FOR THE CLEARWAVE™
The following timetable of events should be used to evaluate the operation of the ClearWave™ during the
DAY 1: | The ClearWave™ action immediately starts to loosen existing scale in both the hot and |
cold water systems. One should find soap lathers more easily. | |
DAY 5 and onwards: | Scale begins to break down and come off water heater elements (immersion heaters) |
and tanks. Most particles are microscopic and will flow through your water system, but some small particles may be seen in the water coming from the hot water tap.
DAY 10 to 16:.............................It should be noticeably easier to wipe clean ceramic, plastic, glass, and metal surfaces.
By now the quantity of bath soap, dish soap, laundry detergent, and laundry softening agents can be reduced. Scale should have loosened on faucet, showerheads and frequently used appliances that boil water (such as coffee makers).
DAY 16 and onwards: ................Scale should continue to loosen from faucet, showerheads, and pipes. With the
continuing break down and reduction of scale from the heating surfaces of water heaters, water should heat up quicker using less energy to achieve the desired temperature.
After 1 to 2 months:....................Any scaly crust or stains in toilets or under faucet should be significantly reduced. No
new stains or crust should form. Mold that attaches to scale will begin to disappear from shower curtains and once cleaned should not reappear. Depending on the water hardness in the area, the full affects can take up to 12 weeks, especially if the system has been heavily scaled up over many years.
NOTES:
1)If iron is present in the water supply, use an iron filter prior to the ClearWave™.
2)Depending on water hardness or water
3)The
MANUFACTURERS’ WARRANTY:
The ClearWave™ unit is guaranteed for 18 months from the date of the original purchase against defects in workmanship and material. During that period these defects will be repaired or the unit will be replaced without charge at manufacturers option. *This guarantee covers normal consumer usage but excludes damage caused by alteration, accident, misuse, abuse, neglect, installation, or normal wear and tear. Should your unit fail within the unit guarantee period, please pack it carefully in the original box and return it to your supplier. This guarantee does not affect your statutory rights. Please return the guarantee card within the box, to register your purchase.
SATISFACTION GUARANTEED:
In the unlikely event you are not satisfied with the performance of the ClearWave™ Water Conditioner it should be returned with the receipt to the point of purchase (complete), and within 180 days of the original purchase date. It should be packed in the original, box and is subject to the: * Terms and Conditions of the manufacturers’ warranty.
Page 5
