Manuals / FieldServer / Computer Equipment / Computer Drive

FieldServer FS-8704-01 instruction manual Hardware Connections, Hardware Connection Tips / Hints

Models: FS-8704-01

1 12

Download 12 pages 48.98 Kb

Page 5

3.Hardware Connections

FS-8704-01 SMC TCP/IP Driver Manual

Page 5 of 12

3.Hardware Connections

The FieldServer is connected to the Ethernet network as shown in the connection drawing.

	Ethernet Hub or Switch
N1	N1
FieldServer 1	FieldServer 2

3.1.Hardware Connection Tips / Hints

Please use the appropriate category Ethernet cable, i.e. At least CAT5 for a 100Mb/s connection.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

Image 5

FieldServer FS-8704-01 instruction manual Hardware Connections, Hardware Connection Tips / Hints

Contents

Driver Manual FS-8704-01 SMC TCP/IP2.2.3. Required 3rd Party Configuration TABLE OF CONTENTS2.2.1. Required 3rd Party Hardware 2.2.2. Required 3rd Party SoftwareFS-8704-01 SMC TCP/IP Driver Manual 1. SMC TCP/IP DescriptionPage 3 of Max Nodes Supported2. Driver Scope of Supply 3.1. Hardware Connection Tips / Hints 3. Hardware Connections4.1. Data Arrays/Descriptors 4. Configuring the FieldServer as a SMC TCP/IP ClientFS-8704-01 SMC TCP/IP Driver Manual Page 6 of4.3. Client Side Node Descriptors 4.2. Client Side Connection Descriptions4.4.1. FieldServer Related Map Descriptor Parameters 4.4. Client Side Map Descriptors4.4.2 Driver Related Map Descriptor Parameters4.5. Map Descriptor Example 5.1. Server Side Connection Descriptors 5. Configuring the FieldServer as a SMC TCP/IP ServerFS-8704-01 SMC TCP/IP Manual Page 10 of∗ Note that no connection information is necessary on Server side 5.2. Server Side Node DescriptorsTHIS PAGE INTENTIONALLY LEFT BLANK FS-8704-01 SMC TCP/IP ManualPage 12 of