SMC TCP/IP Description | FieldServer FS-8704-01 specs

FS-8704-01 SMC TCP/IP Driver Manual

Page 3 of 12

1.SMC TCP/IP Description

The SMC TCP/IP driver allows the FieldServer to transfer data to and from other FieldServers over Ethernet using SMC TCP/IP protocol. The FieldServer can emulate either a Server or Client.

The SMC TCP/IP driver can be used for inter-bridge (FieldServer to FieldServer) communications to perform tasks like mirroring data arrays between FieldServers.

Max Nodes Supported

FieldServer Mode	Nodes	Comments
		Inter-bridge Communications to a virtually unlimited number
Client	N/A	of FieldServers.	Memory limitations	may apply when a
		large number of Nodes are used.
		Inter-bridge Communications to a virtually unlimited number
Server	N/A	of FieldServers.	Memory limitations	may apply when a
		large number of Nodes are used.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com

Image 3

FieldServer FS-8704-01 instruction manual SMC TCP/IP Description, Max Nodes Supported FieldServer Mode Comments

Contents

FS-8704-01 SMC TCP/IP Table of Contents SMC TCP/IP Description Max Nodes Supported FieldServer Mode Comments Required 3rd Party Software Required 3rd Party Configuration Hardware Connection Tips / Hints Hardware Connections Data Arrays/Descriptors Configuring the FieldServer as a SMC TCP/IP Client Client Side Node Descriptors Client Side Connection Descriptions Timing Parameters Driver Related Map Descriptor Parameters Map Descriptor Example Server Side Connection Descriptors Configuring the FieldServer as a SMC TCP/IP Server Server Side Node Descriptors This page Intentionally Left Blank