Remote Control Television Operation
BUTTON | WHAT IT DOES |
MULTI WINDOW (TX-86PW155A & TX-76PW155A only)
This option allows you to watch:
* a television picture and an AV picture at the same time, or
*two AV pictures at the same time.
Pressing this button will access the Picture in Picture options. You can choose between normal, PIP (Picture In Picture) or PAP (Picture And Picture).
The Multipip function does not operate when you are using a Progressive signal. If you are already in Multipip mode and you select an AV input with a Progressive signal the message “progressive input” will be displayed.
PIP (Picture In Picture) Mode
Allows a small picture to be viewed inside the main picture.
The red button allows you to place the small picture in any corner of the main picture. PIP is only available in widescreen modes.
POP (Picture Out of Picture) Mode
Allows a small picture to be shown alongside the main picture.
POP is only available in 4:3 mode.
Locate
Source
Swap
Source
Swap
PAP (Picture And Picture) Mode
Allows two equal sized pictures to be viewed at the same time. The pictures will be shown side by side.
Source
The green button allows you to change the sub picture. The Yellow button lets you swap between the two pictures.
Swap
Changing channels in MULTI WINDOW mode
When the
When the
NORMALISATION
The Normalisation Button is used to reset the television picture and sound settings to factory set levels. Make sure that the Picture and Sound Menus not displayed when the N Button is pressed.
STR
The STR (Store) button is used with a number of features to store settings after adjustments have been made or options have been set. It is also used in TELETEXT and tuning functions.
Please refer to drawing on Page 9 for location of Remote Control Buttons.
12
