Connecting Equipment to the TV - Rear Panel
Connecting a DVD player or Set-top Box
Connecting component video to AV1.
Use the supplied Scart to RCA cable.
Component
Vi deo
AUDIO O UT |
|
AV4 | AV2 AV4 |
| R AUDIO |
| L |
| Y OUT |
| PB OUT |
| PR OUT |
Connecting component video to AV4.
Use the supplied Scart adaptor. Use RCA cables (not supplied) to connect the VCR YUV out to the TV YUV in. Use RCA cables (not supplied) to connect the VCR Audio out to the Scart adaptor audio In. Make sure that the Scart adaptor is switched to IN. 
Y OUT 
PB OUT 
PR OUT 
Component Video
AUDIO RL 
AUDIO
AV4
AV1 AV2
Special note for TX-76PW60A and TX-66PW60A
Make sure that the DVD player or
Monitor Out and Audio Out
The AV2 socket is also the monitor output. Connect the Monitor out from this television to the AV Input of a
second television, VCR or DVD recorder. See page 16 to set up the signal source for AV2 out. Use the | |
supplied Scart adaptor. Make sure that the Scart |
|
adaptor is switched to OUT. Use RCA cables (not |
|
supplied) to connect the external equipment to the | Stereo Amplifier |
| |
Scart adaptor. |
|
If a video recorder is connected to the Monitor Out and video sources (VCR, video disc, camera etc.) are connected to one of the other AV Inputs, the television becomes a visual display for editing or copying. *
The audio output can be connected to a stereo amplifier or recorder. *
The audio output corresponds to the programme being shown on screen.
Component
Video
OU T |
AU DIO
AV4
AV1
NOTE:
Never connect the same video recorder or other device to both the VIDEO IN and MONITOR OUT terminals of this television as this could cause incorrect operation.
* WARNING
Unauthorised recording of material from Television Broadcasts or from other video
and/or audio sources may contravene copyright laws.
34
