Panasonic TX-76PW60A, TX-86PW155A Connecting Equipment to the TV - Rear Panel Connecting a VCR

Connecting Equipment to the TV - Rear Panel

Connecting a VCR

When using a VCR with the television always connect the Aerial to the VCR and connect an RF Cable (not supplied) between the VCR RF-Out and the television RF-In.

You can watch videos by either tuning the television to the VCR (see page 30) or by connecting the VCR to the rear AV terminals.

RF Cable

(Not supplied)

Note: When connecting a mono VCR through the RF-In, please switch the TV to mono.

Connecting a standard VCR

Most standard Videocassette Recorders use RCA type video and audio connectors. If your VCR has different type connectors please refer to the VCR instruction book for details. Use the supplied Scart adaptor. Make sure that the Scart adaptor is switched to IN. Use RCA cables (not supplied) to connect the VCR to the Scart adaptor.

Co mpo n e nt

Vid eo

AUD IO O UT

AV4

RF OUT

RF IN

AV1 AV2

Connecting S-Video Equipment

S-Video equipment uses a 4Pin Mini Din (Male) plug for the video and RCA plugs for the audio.

Use the supplied Scart adaptor. Make sure that the Scart adaptor is switched to IN. Use the S-Video cable (not supplied) and RCA cables (not supplied) to connect the VCR to the Scart adaptor.

Compo nent

Vide o

AUDIO OUT

AV4

RF OUT

RF IN

Note:

AV1

When an S-Video cable is connected to an S-Video input terminal, the RCA video terminal for that AV position will be disconnected.

33