Panasonic TX-66PW60A Tuning Menu - Manual tuning, Tuning the Television to a VCR, operation

Tuning Menu - Manual tuning

This Television has been factory tuned to all the Australian major city channels. Use this tuning procedure only if you wish to reset individual Programme Numbers. The television should be switched ON and the TV/AV Switch set to TV.

Using the Remote Control		Using the Front Panel
Push the Set Up button.		Press the “F” button and move to the Tuning Menu.
		Press the “- / \/” or “+ / /\” button to access Manual
Move to the Tuning Menu.
		tuning.
Access the Tuning Menu.		Press the TV/AV button to switch to Change
Move to Manual tuning.
		programme.
Access Manual tuning.		Press the “- / \/” or “+ / /\” button to select the
Select the programme location		programme location number to tune.
number to tune.		Press the “TV/AV” button to switch to Search.
Start the search. The television will		Press the “- / \/” or “+ / /\” button to start the search.
		The television will automatically search for the next
automatically search for the next
		broadcast signal. As each station is found the search
broadcast signal. As each station is
		will stop. If you do not want this station restart the
found the search will stop. If you do not
		search.
want this station restart the search.
	28	28
	CH 28		CH	28

		Programme
		down/up	Manual tuning (Front panel)
		Search
	Return	down/up	- , +	: Search
	TV/AV	Exit	TV/AV	: Move cursor
			STR	: To store
	‘STR’ Button	Store	F	: To exit
			02	78.01	41
Manual tuning
02	78.01	41	STR F	- / V + / ^ TV/AV
Store the selected station. The			Press the “STR” button to store the selected station.
			The programme location number will flash.
programme location number will flash.
Push TV/AV button to return the			Push the “F” button to return the television to normal
			operation.
television to normal operation.

Tuning the Television to a VCR

Turn the VCR On and either start a known tape playing or set the VCR Test Signal, if fitted, to On (refer to the VCR operating instructions).

Follow the Manual tuning procedure above. The television will treat the VCR as if it was a normal television broadcast station.

NOTES:

The antenna lead must be connected to the VCR and the VCR RF-Out must be connected to the TV RF-In. Please refer to page 33.

The picture and sound quality are usually much better if the VCR is connected using the AV Terminals. Please refer to page 33 or 34.

27