Setup Menu - Q-Link
For
For connection to the appropriate Scart socket on the VCR, refer to your VCR operating instruction book.
In order to make use of
Press the SETUP menu button
Move to
Confirm
Press the TV/AV button at any time to go back to watching TV.
Press the DIRECT TV REC button
Notes:
If the VCR is off, it will automatically switch on when you press the DIRECT TV REC button. To ensure correct recordings are made, the television and VCR should share tuning information. Whenever the Auto setup function is used, tuning data will be downloaded to the VCR.
If at any time you wish to turn off the Q
A message, sent from the VCR, will appear on screen showing what is being recorded, or if it is not possible to record.
Notes:
With Panasonic
If you insert a tape in your VCR and press the Play button, the television will automatically switch on and select the AV2 input so you can view the tape.
If you switch off the television whilst the VCR is in Stop, Fast Forward or Rewind modes, the VCR will switch off automatically.
If
This TV will also communicate with other VCRs that bear the following logos:
“DATA LOGIC” | - | (a trademark of Metz Corporation). |
“Easy Link” | - | (a trademark of Philips Corporation). |
“Megalogic” | - | (a trademark of Grundig Corporation). |
“SMARTLINK” | - | (a trademark of Sony Corporation). |
These VCR’s may support some or all of the above functions. Refer to your VCR operating instruction book.
17
