Set Up Menu
Push the SETUP button
Setup menu
Move to the option
Adjust the chosen option
Push TV/AV at any time to return to watching TV.
Teletext | TOP |
|
Off timer | Off | RF Mode |
Flicker reduction | Off |
Tuning menu
Geomagnetic
| Setup menu |
|
| Off timer | Off |
AV Mode | Flicker reduction | Off |
Volume correction |
| |
| On | |
| Geomagnetic |
|
| AV1 select | YUV |
AV2 out
Allows you to select which audio / video source will be sent to the AV2 Scart output. You can choose between TV (current selected programme), AV1, AV3, AV4 or Monitor (whatever programme is being shown on the screen). YUV pictures are not available on AV2 out.
Teletext (RF Mode only)
Off timer
Flicker reduction
Volume correction (AV Mode only)
Tuning menu (RF Mode only)
Geomagnetic
This control allows you to change between TOP (or FLOF) and List modes. TOP mode is the current preferred method in Australia.
FLOF mode is the current preferred method in New Zealand. FLOF is also known as FASTEXT.
The
This activates motion compensation to smooth the image and get rid of unwanted picture movement.
This feature allows you to adjust the input level from your DVD player etc. to match the sound level of normal TV reception. You can set the input level for each AV input.
Allows you to turn the
This provides access to many other features including tuning options and Owner ID. Please refer to page 23.
If you notice a slight tilt in the picture or if there are coloured patches at the corners of the screen, use this feature to eliminate them.
Refer to page 18 for instructions on using the geomagnetic correction adjustment.
AV1 select (AV Mode only)
Allows you to select which video source to apply to the AV1 input. You can switch between Component Video (YUV) and RGB.
16
