CLEANING LAMBSWOOL DUSTER WITH VACUUM CHAMBER

1.Your DustTamer Ultra® Vacuum Chamber can be conveniently carried from room to room operating on battery power.

2.The number of times you clean your Lambswool Duster in the Vacuum Chamber will be determined by the amount of dust you pick up. Rooms with heavy dust accumulation may require several cleanings, whereas small rooms or quick touch-up dusting may only require one cleaning.

Your DustTamer Ultra® is designed to clean everyday household dust, not thick, decades old dust found in attics, garages, warehouses, etc.

Note: To keep your Lambswool Duster free of dust and allergens, we recommend periodic cleaning of your Lambswool Duster in the Vacuum Chamber, even if dust isn’t visible on the Lambswool Duster.

To clean your Lambswool Duster in the Vacuum Chamber, simply follow these steps:

a. Press and hold the unit’s on/off switch to start the suction action. (see figure 4)

b. Insert the lambswool duster into the vacuum chamber and slowly move the duster in an up and down twisting motion several times. (see Figure 5)

c. The combination of the Dust Agitation/Suction Vents with the up and down twisting motion will most effectively remove dust from the Lambswool Duster. Hold the on/off switch to maintain the suction. Release to turn the unit off.

During the above cleaning cycle, dust and allergens are being suctioned away and captured in the Dust Drawer’s Stainless Steel Pre-Filter Screen and the HEPA Filter (see figure

6). Only clean, allergen free air is recirculated into your home.

Your Lambswool Duster is now clean and ready to dust another room in your house.

12

Page 12
Image 12
FilterStream D4500 instruction manual Cleaning Lambswool Duster with Vacuum Chamber