BURNER AIR SHUTTER ADJUSTMENT (Continued)

POWER BURNER

Power burner air shutter adjustment is located on dual necks of the power burner where they connect with the gas manifold and oriÞ ces, as show in Fig. 35-1.

CAUTION: NEVER handle a hot burner.

To adjust the air shutters:

1.Remove the cooking grid and collimator.

2.Lift the back of the burner upward so that the pin in the bottom back clears the hole in the burner rest.

3.Move the burner back away from the front of the grill while continuing to lift the back upward so that it clears the rear Þ re wall.

4.Turn the shutter to the desired opening size and replace the burner to test the effect on the ß ame.

Burner ß ames should be blue with yellow tips.

Air shutters Inner burner

Outer burner

Fig. 35-1

ADJUSTING THE LOW FLAME SETTING

After changing gas orifices and adjusting the regulator to burn a new gas, adjust the height of the

ßame with a valve in LOW position so that is is low without going out. Use the small adjusting screw in the center of the valve stem. This screw is accessible by removing the valve knob, which pulls straight off the end of the valve stem.

35