Firex 591S manual The indicator/control assembly provides, Duct Smoke Detector Remote Accessories

The professional choice in fire safety.

NEW ACCESSORIES

The NEW remote accessories are designed to be used with Firex duct smoke detectors to provide the most complete functionality ever available in such a device.

The remote accessory is available with either the single gang remote indicator/control (591 models), or with the addition of a single gang strobe assembly (592 models). Both versions are compatible with standard Decora style cover plates (choice of white, red or stainless steel). A strobe-only version (593 models) is available for retrofit upgrade of “controller only” installations.

The indicator/control assembly provides:

●Visual indication of detector Pilot, Trouble and Alarm Functions

●Selectable audible indication of Alarm, Trouble or both

●Buzzer Silence function, with silenced indication and “ringback” following condition correction

●Lamp/Buzzer test function

●Key-Operated detector Test and Reset functions

●Lever-operated “No-Tools” terminal block

●Port for plugging in the optional strobe assembly

●Black “DUCT SMOKE DETECTOR” decal included for front plate

●Blue “SMOKE”, red “FIRE” strobe lens decals included for both horizontal and vertical mounting

Strobe Connection

The strobe assembly provides visual indication of alarm conditions, and is connected to the indicator/control assembly via the provided polarized connector.

To install the strobe module, simply plug the provided connector onto the pins as indicated on the rear of the indicator/control module. Snap the strobe lens into the cover plate, and install cover plate following completion of remote module wiring.

NOTE: The strobe and audible buzzer features are not ADA compliant, and not intended for life safety notification or evacuation purposes (public mode). These functions are for duct smoke detector status indication only (private mode).

Duct Smoke Detector Remote Accessories

Universal Voltage Models Compatible with230 VAC, 115 VAC, 24 VAC or 24 VDC operation

2650-760 Ionization • 2650-761 Photoelectric

2650-660 Ionization • 2650-661 Photoelectric

2650-560 Ionization • 2650-561 Photoelectric

591S

592SC

Audible Buzzer Configuration

There are two jumpers located on the rear of the indicator/control assembly. To enable audible buzzer operation for Alarm or Trouble conditions, simply leave the jumpers in place. To disable either or both functions, remove the appropriate jumper(s).

	ALM	TBL		ALM	TBL	ALM	TBL	ALM	TBL
Buzzer will			Buzzer will			Buzzer will		Buzzer
function on			function on			function		will not
both Alarm			on Alarm			on Trouble		function
and Trouble			Condition			Condition		on Alarm
Conditions				only		only		or Trouble
								Conditions