Silence and Ringback Functions
On the occasion where an audible alarm or trouble condition needs to be silenced while the detector condition is inspected and remedied, the indicator/control module provides a silence function. The slide switch located on the front of the module is pushed DOWN to activate the silence function.
Upon correction of the notified condition, the silenced buzzer will resume sounding. The ringback feature serves as a reminder to reset the silence switch to the “normal”, UP position.
Note that the strobe module, when installed, will not stop operating when the silence function is engaged.
Normal Silenced
“Standby” Mode
Mode
Wiring
For appropriate duct detector wiring terminals, please refer to detector and remote accessory installation instructions.
Products
591 Series Remote Accessory Controllers
591W Remote Indicator/Control Assembly w/White Single Gang Cover Plate
591R Remote Indicator/Control Assembly w/Red Single Gang Cover Plate
591S Remote Indicator/Control Assembly w/Stainless Steel Single Gang Cover Plate
592 Series Remote Accessory Controllers with Strobe
592WC Remote Indicator/Control Assembly w/Strobe Assembly (Clear Lens); White Double Gang Cover Plate 592WO Remote Indicator/Control Assembly w/Strobe Assembly (Opaque Lens); White Double Gang Cover Plate 592RC Remote Indicator/Control Assembly w/Strobe Assembly (Clear Lens); Red Double Gang Cover Plate 592RO Remote Indicator/Control Assembly w/Strobe Assembly (Opaque Lens); Red Double Gang Cover Plate 592SC Remote Indicator/Control Assembly w/Strobe Assembly (Clear Lens); Stainless Steel Double Gang Cover Plate 592SO Remote Indicator/Control Assembly w/Strobe Assembly (Opaque Lens); Stainless Steel Double Gang Cover Plate
593 Series Remote Accessory Strobes (as an optional field upgrade kit for existing installed 591 Series Controllers)
593RC Strobe Assembly (Clear Lens); Red Double Gang Cover Plate
593RO Strobe Assembly (Opaque Lens); Red Double Gang Cover Plate
593SC Strobe Assembly (Clear Lens); Stainless Steel Double Gang Cover Plate
593SO Strobe Assembly (Opaque Lens); Stainless Steel Double Gang Cover Plate
593WC Strobe Assembly (Clear Lens); White Double Gang Cover Plate
593WO Strobe Assembly (Opaque Lens); White Double Gang Cover Plate
Power Requirements: | Standby | 13mA | Dimensions: | Single Gang Plate: |
| Alarm LED | 22mA |
| |
| Trouble with Buzzer | 33mA |
| (69.85 mm) W |
| Trouble Silenced | 33mA |
| |
|
| Double Gang Plate: | ||
| Trouble without Buzzer | 13mA |
| |
|
| |||
| Alarm with Buzzer | 37mA |
| |
| Alarm Silenced with Buzzer | 37mA |
| (114.33 mm) W |
| Alarm with Buzzer and Strobe | 154mA | Wiring: | |
| Alarm Silenced with Buzzer and Strobe | 157mA | ||
| Approvals: | U.L. Listed for use with Firex duct | ||
| Lamp Test with Buzzer | 62mA | ||
| Lamp Test with Buzzer Silenced | 52mA |
| smoke detectors including all 2650 |
Sound Pressure: | 60db @ 10 ft. |
|
| Series duct smoke detectors |
|
|
|
| UL URRQ, URRQ7.S7425 / CSFM / MEA |
Controls Americas |
|
|
|
|
515 South Promenade Avenue | 3505 Laird Road Unit #14 | Technical Service | R | US |
|
|
| ||
Corona California | Mississauga Ontario L5L 5Y7 Canada | Telephone +1 800 445 8299 | LISTED |
|
Cust. Svc. Telephone +1 800 951 5526 | Cust. Svc. Telephone +1 800 387 7978 | Facsimile +1 630 260 723 |
| |
Cust. Svc. Facsimile +1 630 260 7299 | Cust. Svc. Facsimile +1 905 828 1265 | technicalservice@invensys.com | 268A Listed | |
iccacustomerservice@invensys.com | iccacustomerservice@invensys.com |
|
|
|
| IS | T I | N |
|
|
| ||
L |
|
| OF | CALIFO G | ||||
A | T | E |
|
| RN | |||
|
|
|
|
| I | |||
ST |
|
|
|
|
|
| A | |
S |
|
|
|
|
|
|
| L |
T |
|
|
|
|
| A | ||
A |
|
|
| H |
| |||
TE | FIRE MAR |
|
| |||||
S |
|
|
|
| E | |||
E | R | V I C | ||||||
|
|
|
| |||||
T
H
E E R
WA R R
Y EA
R
ANTY
MEA ACCEPTED
© 2006 Invensys Controls Americas 6/06 -
