Assembly | First Act FD-517, FD-520, FD-514, FD-515 guide

ASSEMBLY (cont.)

You can now adjust the position, height, and angle of the drums.

Remove the wing nut and top felt of the cymbal arm (E) and place the cymbal over the threaded rod on top of the bottom felt. Replace the top felt and wing nut.

Place the cymbal arm into the mount furthest away to you at the front of the bass drum. You can now adjust the height and tighten.

Place the drum seat (J) behind the drum set. (*Not included with model FD-514) Now grab the pair of drumsticks (L) and play. Have fun!

Use the drum-tuning key (I) to make any small changes in tuning. Turning the tension rods to the right will raise the pitch of the drum. Turning the tension rods to the left will loosen or lower the pitch.

Remember to only turn one-quarter turn at a time and don’t over tighten.

Good luck and drum on!

FIRST ACT

P.O. Box 811

Needham, MA 02494 USA

www.firstact.com

Info@firstact.com

CUSTOMER SERVICE 888-551-1115

45/04

First Act FD-517, FD-520, FD-514, FD-515 manual Assembly

Models: FD-517 FD-515 FD-520 FD-514

ASSEMBLY (cont.)

Good luck and drum on!