Setting Up Your
Model
S e ttin g Up Yo u r
GENERAL P RECAUTIONS
Do not place any of the equipment near a radiator, vent, or other place where it might be exposed to heat, moisture, dust, vibrations, or strong magnetic fields. If any liquid comes into contact with the monitor, turn off the power immediately and have a qualified technician inspect the equipment before using it again.
When installing the camera, follow manufacturer’s advice when using power tools, steps, ladders, etc. and wear suitable protective equipment (e.g., safety goggles) when drilling holes. Before drilling holes through a ceiling, check for hidden electricity cables and water pipes.
INSTALLING THE CAMERA
Before the camera is installed, the camera pairing procedure should be completed.
DC Power Supply Mode
1
2
3
Connect the power cable to the DC IN of the camera.
Plug the power supply into the electrical outlet.
Press POWER button to turn on the camera.
Battery Power Supply Mode
1
2
Insert 3 AAA alkaline batteries making sure the polarity is correct.
Press POWER button to turn on the camera.
Table top or wall mounting:
Determine a location for the camera that will provide the best view of your baby in his crib. Place the camera on a flat surface, such as a dresser, bureau, or shelf. Or mount the camera on a wall. Be sure to place camera and monitor no less than 3 feet away from your baby’s crib. Do not place the camera near open windows, direct sunlight or heat sources.
7
