Using the
3STAY Key
BEFORE ARMING, make sure all doors and windows are closed. Refer to
CHECKING FOR O P E N ZONES on page 13.
THE STAY MODE ARMS THE PERIMETER, BUT ALLOWS USE OF THE ENTRY/EXIT DOOR.
PERSONS WITHIN THE PREMISES CAN MOVE ABOUT FREELY.
ARMING PERIMETER ONLY
WITH ENTRY DELAY ON
Use this key when staying inside, but expect someone to use an entry/exit door later.
1.Enter your security code and press the STAY key.
2.The keypad beeps three times and displays the armed STAY message. The red ARMED indicator lights. Note that there is an exit delay in effect before arming actually takes place. See the note below.
3.After arming, an alarm sounds immediately if a protected perimeter window or non- entry/exit door is then opened, but you may otherwise move freely throughout the premises.
Anyone entering later can enter through an entry/exit door without causing an alarm, but they must disarm the system within the entry delay period to avoid sounding an alarm.
If you wish to open the entry/exit door to let someone in after arming STAY, you can restart the exit delay at any time – simply press the [✱] key , and then let that person in. This will avoid having to disarm the system and then
Note: When you first arm the system in the STAY mode, “You may exit now” will be displayed on an Alpha keypad during the programmed exit delay. This delay is in effect in the system even when arming STAY. When the exit delay period ends, “You may exit now” disappears and the system is then fully armed in the STAY mode.
TYPICAL DISPLAYS – “ARMED STAY”
|
|
|
|
|
|
|
|
|
| STAY | AC |
|
|
| ARMED | ***STAY *** |
|
|
|
|
|
|
| |||
|
|
|
|
| YOU MAY E XIT NOW |
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| ALPHA | ||||
|
|
|
|
|
|
| ||
| ||||||||
|
| disappears when the exit delay expires. | ||||||
|
| – 16 – |
|
| ||||