FIRE ALARM SYSTEM (Continued)

Manually Initiating 1.

Should you become aware of a fire emergency before your detectors sense the

a Fire Alarm

problem, go to your nearest Keypad and manually initiate an alarm by pressing the

 

appropriate panic key(s), assigned for FIRE emergency (if programmed by the

 

installer). Check below, and on page 23.

2.

Evacuate all occupants from the premises.

3.

If flames and/or smoke are present, leave the premises and notify your local Fire De-

 

partment immediately.

4.

If no flames or smoke are apparent, investigate the cause of the alarm. The zone

 

number(s) of the zone(s) in an alarm condition will be displayed at the Keypad.

Ask your installer which lettered key, or key pair, has been assigned for manually initiating a FIRE alarm, and place a check mark in the box next to the assigned key or key pair.

CHECK LETTERED KEY

 

 

 

 

 

ASSIGNED FOR FIRE

CHECK KEY PAIR ASSIGNED FOR FIRE

A

 

OR

 

 

 

 

 

 

PRESS

1

and

✱

AT THE SAME TIME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B

 

OR

PRESS

✱

and

#

AT THE SAME TIME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

C

 

OR

PRESS

3

and

#

AT THE SAME TIME

 

 

 

 

 

 

 

 

Press and hold the lettered key assigned for Fire emergency for 2 seconds.

If the keypad does not have individual lettered keys,

Press the key pair assigned for Fire emergency.

– 30 –