Using the 6
BYPASS Key
BYPASSING PROTECTION ZONES
This key is used when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed. All bypasses are removed when an OFF sequence (security code plus OFF) is performed . Bypasses are also removed if the arming procedure that follows the bypass command is not successful.
The system will not allow fire zones to be bypassed.
To bypass zones, the system must be disarmed first.
BYPASS
1.
+ 6
(Security Code)
2.
(Zone Numbers)
3.BYPASS 07 F RONT UPST AIRS BE DROOM
Typical bypass message
4.DISARME D BYPASS RE ADY T O ARM
ENTER SECURITY CODE THEN PRESS BYPASS
Example: 7 
2 
9 
6 then press the BYPASS key.
ENTER ZONE NUMBERS
Enter the zone number(s) for the zones to be bypassed (e.g., 01, 02, 03, etc.).
Important! All
WAIT
The keypad will display the word BYPASS along with each bypassed zone number. Wait for these zones to be displayed, to be sure that intended zones are bypassed.
ARM AS USUAL
Arm the system as usual when the keypad displays the "Ready ” message.
(Continued)
– 21 –
