Burglary Protection
Security Codes
Fire Protection
SYSTEM OVERVIEW
Your system provides four modes of burglary protection: STAY, AWAY, INSTANT and MAXIMUM, and allows you to BYPASS selected zones while leaving the rest of the system armed. You must turn on or "arm" the burglary protection portion of your system before it will sense burglary alarms. The system also provides a CHIME mode, for alerting users to the opening of protected doors and windows while the system is disarmed. Refer to the other sections of this manual for procedures for using these features.
The following table lists the four different arming modes and the results of each.
Arming |
| Features For Each Arming Mode |
| |
Mode | Exit Delay | Entry Delay | Perimeter Armed | Interior Armed |
|
|
|
|
|
AWAY | Yes | Yes | Yes | Yes |
STAY | Yes | Yes | Yes | No |
INSTANT | Yes | No | Yes | No |
MAXIMUM | Yes | No | Yes | Yes |
|
|
|
|
|
At the time of installation, you were assigned a personal
The fire protection portion of your security system (if used) is always active and will sound an alarm if a fire condition is detected. Refer to the FIRE ALARM SYSTEM section for important information concerning fire protection, smoke detectors and planning emergency exit routes from the premises.
– 5 –