Notes and Tips - Appendix A
Setting Daylight Saving - This setting allows the radio to convert UTC time used by NOAA to your local time of day. It does not automatically set your clock to adjust for daylight savings time. Be sure to set the daylight savings time to ON and OFF in accordance with time changes in your area.
Note: The
CAUTION!
Storm front activity can continue even though the alert’s effective time has expired. The end of an alert does not mean that the related emergency is over.
Note: Time keeping functions will be lost and the clock will not reset to the correct time if AC power is disconnected from the unit and there is no battery
Note: For best reception, lift up the
Handicapped Accessories - Appendix B
The
Once connected, these devices will automatically be activated when the radio receives an advisory, watch or warning for the duration of the alert or until you press the Radio OFF button.
To connect a special needs accessory, plug the device into the Remote Alert jack on the rear panel of the radio shown in Fig. 1. This jack requires a 3.5 mm connector.
Fig. 1
Note: If an alert is blocked, the accessory will not be activated. The Alert Volume switch does not affect devices connected to the remote alert ouput.
To purchase special needs accessories contact Sima Products at
17