Fisher & Paykel 2002 VRS 2.0 Toe Kick Installations - D1796FI and D1996FI with Custom Panel Door

Models: 2002 VRS 2.0

1 22
Download 22 pages 37.8 Kb
Page 11
Image 11
4" Toe Kick Installations – D1796FI and D1996FI with Custom Panel Door

4" Toe Kick Installations – D1796FI and D1996FI with Custom Panel Door

Where the custom panel’s height matches the dishwasher’s door, a 2" decorative fill strip or cutting board must be used to fill the area between the panel and the counter top (A).

For this installation, the custom door panel dimensions are 23-1/2" wide x 28-1/8" high. The opening width is 23-3/4", 3/8" narrower than standard domestic dishwashers.

There will be a 1-3/4" height difference

between controls and panel.

(A)2" decorative fill strip or 6" Toe Kick Installations – D1796FI and D1996FI with Custom Panel Door cutting board required

28-1/8"

23-1/2"

4"

(B)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Custom

panel goes from

 

 

 

toe kick to counter top:

 

 

 

23-1/2"w x 30-1/8"h.

Custom panel

extends

 

 

 

 

2" beyond/above

 

30-1/16"

dishwasher door.

23-1/2"

4"

23-3/4"

Another installation option for 4" toe kick cabinets is to extend the door panel 1-3/4" above/beyond the control panel (B). This eliminates the need for a 2" decorative fill strip. This door panel is 23-1/2" wide x 30-1/8" high (two inches higher than previous option). This also means a 2" support strip must be installed between the tank and the counter top to fill the gap. Even though, like all ASKOs, the D1796FI and D1996FI can be mounted with screws going through the sides, this support strip can also be used for anchoring the unit from the top. A popular and more finished looking installation is to use the metal top fill strip shown in Dishwasher Accessories (page 6). It fills the gap between the top of the tank and the counter top. When used, the dishwasher is mounted with screws through the sides of the tank into the sides of the cabinets. The custom door panel should be at least 3/4" thick.

6" Toe Kick Installations – D1796FI and D1996FI with Custom Panel Door

For 6" toe kick installations, fill strips are unnecessary. These units install like a standard ASKO dishwasher.

Installing the custom panel is simple. No additional trim kit is needed. Four screws go through the dishwasher’s pre-drilled door and into the back of the panel. The screw heads are completely hidden when the door is closed.

28-1/8"

23-1/2"

6"

See the Dishwasher Installation Instructions for detailed information.

9

Page 11
Image 11
Fisher & Paykel 2002 VRS 2.0 manual Toe Kick Installations - D1796FI and D1996FI with Custom Panel Door