Fisher & Paykel 2002 VRS 2.0 manual Electrical And Water Requirements - EasyInstall Dishwashers

Electrical And Water Requirements – EasyInstall™ Dishwashers

ASKO’s dishwashers come with all the connections you need. We’ve eliminated the need to get into the electrical and mechanical area, which makes installation simple and quick. If a dishwasher is being installed in an area for the first time, most of the cabinetwork, plumbing, and electrical has to be done before you move the machine into place. If you are replacing an old dishwasher, you must check the plumbing connection and wiring before you install the new dishwasher.

This system has these components which have been approved by regulatory authorities (cUL):

•Over 5' of Pex hose that replaces the water-inlet copper tubing. It has a 3/8"-compression fitting that mates with the shut-off valve. Length: 5'2" from back of unit.

•Over 6' of drain hose with an adaptable drain connection. The high loop is built into this hose on the back of the unit. If this loop is removed to lengthen the hose, another high-loop must be built into the installation somewhere along the line (typically where the hose passes through the cabinet). Length: 6'6" from back of unit.

•A 6' long electrical cord with standard, 3-pronged, 110V plug. This eliminates the need to wire anything under the unit.

Drain hose with multiple size adaptor.

Each unit comes already wired with a standard three-pronged plug.

Back of ASKO dishwasher with

EasyInstall system.

Pex hose with 3/8” brass fitting.

10