8WASH CYCLES AND OPTIONS
WATER LEVELS
High
Med/High
Medium
Med/Low
Low
ACTUAL
LEVEL OF WATER
AUTO WATER LEVEL
Your ecosmart can automatically select the appropriate water level for the load.
1.Place your clothes in the machine, and press Power.
2.Select wash cycle (select Auto if not automatically selected)
3.Press START/PAUSE
During fill the machine will pause occasionally to sense the water level. The machine will check if the water level is correct by using a series of two different agitate strokes. (This may take over a minute). If it detects that the water level is not enough, it will fill with more water and
If you open the lid during this time your ecosmart will assume you are adding more clothes and will
•When washing an unusual load eg. large bulky garments, pillows, we recommend you manually select the water level and select the Delicate cycle.
•Manually select the water level if there is already water in the machine.
Note: If you feel the machine does not fill to the correct level, you can adjust the level the machine selects. (Refer to the Option Adjustment instructions on pages 14 to 17.)
MANUAL WATER LEVEL SELECTION
The agitator has five levels marked on its stem that can be used to help you select the correct water levels. Select the correct water level by using the mark nearest to the top of the clothes.
•The levels marked on the agitator do not correspond exactly to the level of water. They indicate the level of dry clothes suitable for the water level.
•Your ecosmart may occasionally add water during agitation.This is to maintain the water level due to the release of air trapped in the garments.
•Out of balance loads, tangling or splashover can be caused by selecting a water level that is too high.
