CHANGING PRE-SET OPTIONS 17
END OF CYCLE
BEEPS
| NUMBER OF BEEPS | ||||
| Light on |
|
|
| |
| TIME SAVER | = | 15 beeps | ||
| SOAK | = | 5 beeps | ||
| SOFTENER |
|
|
| |
| RINSE | = | no beeps | ||
|
|
|
|
| |
| DEFAULT RINSE |
|
| ||
| OPTION |
|
|
| |
| RINSE OPTIONS |
|
| ||
| Light on |
| 1st | 2nd |
|
|
|
| |||
|
| rinse | rinse |
| |
| MED spin |
| deep | deep |
|
|
|
| rinse | rinse |
|
| SLOW spin |
| short | deep |
|
|
|
| spin | rinse |
|
| HOLD |
| spray | deep |
|
|
|
| rinse | rinse |
|
|
|
|
|
|
|
VOLUME OF WATER USED IN THE SHOWER RINSE
(REGULAR CYCLE)
SHOWER RINSE VOLUME
Light on
HIGH = more water MED = more water
LOW = FACTORY SETTING
CONTROLLED COLD
The beeps signaling the end of the cycle can be increased or decreased.
1.Enter the Option Adjustment Mode.
2.Use the WASH OPTION button to select the number of beeps you prefer.
3.Press POWER to store your selection.
The normal rinse on the Regular and Heavy Duty cycles is a Shower Rinse.When you select Softener Rinse on these cycles the rinse changes to the default rinse. The default rinse is the rinse option used on the Wool, Delicate and Permanent Press cycles.The default rinse is a spray rinse followed by a deep rinse. However you can change the default rinse to a single deep rinse or two deep rinses.
1.Enter the Option Adjustment Mode.
2.Use the SPIN SPEED buttons to select the rinse option you prefer.
3.Press POWER to store your selection.
You can increase or decrease the volume of water added during the shower rinse on the Regular cycle.
1.Enter the Option Adjustment Mode.
2.Use the WATER LEVEL buttons to select the volume of water you wish to be used in the shower rinse.
3.Press POWER to store your selection.
The ecosmart is designed for installations that have both hot and cold water. To ensure optimum performance even in very cold weather, the cold water temperature is controlled to 60ºF. However if for some reason you do not have hot water available you may need to change to uncontrolled cold in very cold weather.
Ecosmart leaves the factory with the Controlled Cold Option. You can change this by pressing the ADVANCE button.
