Installation Instructions
Installation instructions
1 Check that the oven cavity is square and within the limits specified.
2 Remove the mains wiring access cover.
3 Connect the mains wiring and refit the access cover.
4 Remove the oven door and accessories and slide the oven into place. Centre the oven in the cavity, leaving a space of 2.5 mm on each side between the door edge and the joinery.
5 Use the four ‘wood screws’ and washers supplied to secure the oven to the cavity, through the holes in the oven frame. See the flush fitting installation options.
6 Test the oven then refit the door and accessories. Check that the oven is firmly secured in the oven cavity.
Flush fitting installation options
B |
20 mm |
2.5 mm |
C |
20 mm
2.5 mm
CUPBOARD FRONT
Installing a cooktop above the oven
If installing a cooktop above the oven ensure adequate clearance is provided for the cooktop as per the cooktop manufacturer’s instructions.
D |
20 mm |
2.5 mm |
DRAWER FRONT |
4