6
Installation instructions
Dimensions and clearances
This cooktop has been designed and constructed in accordance with the following codes and specifications:
AGA101 (AS 4551) Approval Requirements for Domestic Gas cooking appliances
AS/NZS
AS/NZS
AS/NZS 1044 Electromagnetic Compatibility Requirements.
The installation shall comply with the dimensions in Figs. 1 and 2, bearing in mind the fol- lowing requirements:
A minimum clearance of 20 mm has to be kept between the base of the cooktop and the top of an underbench appliance or a shelf. To ensure this clearance, mount the spacers supplied with the appliance, as shown in Fig. 3.
Overhead clearances - In no case shall the clearance between the highest part of the cooktop and a range hood be less than 600 mm, or for an overhead exhaust fan, 750 mm. Any other
Side clearances - Where the distance from the periphery of the nearest burner to any vertical combustible surface is less than 200 mm, the surface shall be protected in accordance with local regulations in force to a height of not less than 150 mm above the cooktop for the full dimension (width or depth) of the cooking surface area.
Where the distance from the periphery of the nearest burner to any horizontal combustible surface is less than 200 mm, the horizontal surface shall be more than 10 mm below the surface of the cooktop, or the horizontal surface shall be above the trivets (see requirement for vertical combustible surfaces above).
Protection of combustible surfaces - Local regulations in force specify that, where required, protection shall ensure that the surface temperature of the combustible surfaces does not exceed 65 °C above ambient. To comply with this requirement satisfactorily, fix 5
500
200 |
|
560 | 0 |
|
580
34
0 2 – 480
60
Fig. 1 Product and cutout dimensions