Using your dishwasher
9
|
| b | c |
a | |||
aPower
bProgramme button c Programme indicator
Fig. 2 Control panel for models DW60CSW1 and DW60CSX1
| a | b | c | d | e f | g | h |
|
|
|
|
|
|
| Fig. 3 Control panel for models |
|
|
|
|
|
|
| DW60CDW2 and DW60CDX2 |
a | Power |
|
|
|
| f | Rinse Aid indicator |
b | Reset button |
|
|
|
| g | Programme button |
c | Delay start |
|
|
|
| h | Programme indicator |
dTime remaining indicator e Heater indicator
Quick start
1Remove all food scraps and load the dishes.
2 Add detergent.
3 Check rinse aid.
4 Check that there is nothing obstructing the spray arms.
5 Close the door.
6 Turn the POWER button ON. All the programme indicators will light up. 7 Press the Programme button to select a wash programme.
After five seconds, the selected wash indicator light will flash when the programme is in progress, the dishwasher will beep once and the wash programme will start automatically. The Time Remaining display will display the estimated time for the programme (models DW60CDW2 and DW60CDX2 only).
At the end of the wash cycle, your dishwasher will beep six times, and all the programme indicators will light up.
8Leave the door slightly ajar to improve the drying performance.
9 After several minutes, set the POWER switch to OFF. 10 Remove dishes once they are cool enough to touch.
