10
Using your dishwasher
Interrupting the programme
Models DW60CD
Press the Power button.
Open the door slowly.
Important!
There is a risk of being sprayed with hot water. Do not open the door fully until the spray arm has stopped rotating.
If the door is left open during the wash cycle the dishwasher will beep ten times every thirty seconds.
When the dishwasher has been paused and the dishwasher has heated the water, leave the door ajar for several minutes and then close. Otherwise, the dishwasher door may open due to expansion.
Cancelling or modifying the programme
A wash cycle can be modified if it has only been running for a short time. The detergent dispenser may need to be refilled.
To cancel and reset a programme:
Models DW60CDW2 and DW60CDX2
Press the Reset button. One beep will sound, and all the programme indicators will light up, to indicate that the current programme was cancelled successfully. You can now select a new wash programme.
Models DW60CSW1 and DW60CSX1
Press the Power button.
Memory function (models DW60CDW2 and DW60CDX2 only)
If the power supply is switched off during a cycle, or the POWER button is accidentally pushed, your dishwasher is able to remember the current setting and place in the wash cycle. It will automatically return to the same place in the cycle, once power is restored (or the POWER button is set to ‘ON’), and will continue with the wash.