Caring For Your Ecosmart

Care and Cleaning

When you have finished

Turn off the faucets to prevent any chance of flooding should a hose burst.

Unplug the machine from the wall socket.

Cleaning your Ecosmart

Clean with a soft damp cloth and wipe dry.

Do not use chemical or scouring cleaners as they can damage the paint and plastic surfaces.

You can remove the lid for cleaning. Open the lid fully, hold one side with one hand and gently tap the other side with an upward motion.

To replace the lid, hold the lid vertically and align both hinges before pushing down firmly.

To remove the agitator for cleaning, unscrew the nut down the center of the agitator by turning counter-clockwise.

CAUTION!

The agitator must be fully pushed on to the shaft when refitting.

Tighten the plastic nut firmly by hand. Ensure the agitator is not loose.

Cleaning the Fabric Softener Dispenser When using fabric softener, rinse your dispenser at the end of each wash, using warm soapy water.

Separate the cup from the dispenser body by pushing downwards on the base of the cup.

Cleaning the Inside of your Ecosmart

You can program a hot wash into your Favorite cycle to thoroughly clean your machine.

1. Press POWER button.

2. Press and hold the Favorite cycle button until you

Push cup through

hear two quick beeps and the Favorite light flashes.

dispenser with thumb

 

3. Select the Permanent Press cycle.

4. Select a hot wash.

5. Press Favorite again to store the selection.

6. The Ecosmart will then fill with hot water and do a hot wash. It’s a good idea to clean the machine

30

using this cycle without clothes and a couple of cups of powered detergent, every few weeks.

Page 30
Image 30
Fisher & Paykel GWL11 Caring For Your Ecosmart, Care and Cleaning, When you have finished, Cleaning your Ecosmart