![](/images/new-backgrounds/1320591/32059167x1.webp)
32
If your washer beeps for help
LID LOCKED light is flashing.
Make sure the lid is closed.
Press START/PAUSE (refer to page 10).
If the symptom persists call your Fisher & Paykel Dealer or Authorised Repairer.
First RINSE or SPIN progress light is flashing as well as the SPIN SPEED light.
Wash load is out of balance. Ensure the machine is stationary. Manually redistribute the load. Check the machine is level (refer to page 3).
Single beep every second and... possible solutions
Some lights are on but the pattern of lights is unfamiliar.
1Turn your machine off at the wall,
2Wait for 60 seconds and turn it back on.
3Check the machine is level (refer to page 3).
4Remove load and retry.
5Put through a deep RINSE and SPIN.
6If the fault
If the machine still will not work call your Fisher & Paykel Dealer or Authorised Repairer to arrange service (refer to page 38).